Climatouch CT03TS/217S31 User Manual

Climatouch /CT03TS/217S31 Programmable Universal Touch Screen thermostat
• Fully configurable 1-4 stages heat/ cool
• Can be configured for heatpumps , air handlers , oil, gas electric furnaces in any
combination
• Backlit display with “Night Reverse”
• Auto change over
• Ultra friendly throw away this manual
• Permanent memory no batteries required
• Relay outputs provide reliable operation
• Suitable for Residential / Commercial
• Outdoor wireless Temperature sensor optional
Specifications
Electrical Rating: 24volt AC
1 amp maximum per terminal
4 amp maximum total load
Temperature Control Ranges Accuracy +/- 1ºF 41ºF- 95ºF , adjustable dead band and
differential
System Configurations: 2 stage heat, 2 stage cool , heat pump , air handler , gas ,
oil, electric in any combination whatsoever (totally
universal)
Terminations I1-I2-Dh-H Future expansion
C-Y2-R–Ob-W2-G-Y1
Safety Information:
Always turn off power at the main power supply before installing or removing
thermostat.
• This product is for 24 VAC operation only
• All wiring must conform to local and national electrical and building codes.

Climatouch CT03TS/217S31 Specifications

General

Model	CT03TS/217S31
Power Supply	24V AC
Temperature Range	5°C to 35°C
Temperature Control Accuracy	±0.5°C
Display	LCD
Operating Humidity	5% to 95% RH (non-condensing)
Weight	150g
Installation	Wall-mounted
Compatibility	Compatible with most HVAC systems

Summary

Specifications

Electrical Rating

Details the voltage and current requirements for the thermostat.

Temperature Control Ranges

Specifies accuracy, temperature range, and adjustable dead band settings.

System Configurations

Lists supported HVAC system types and stages, including heat pumps and furnaces.

Terminations

Provides a list of terminal designations for wiring connections.

Safety Information

General Safety Precautions

Essential safety guidelines including turning off power and conforming to codes.

Installation

Replacement Procedure

Alternative Terminal Designations

Terminal Mapping

Configuration

System Setup Guide

Explains how to configure the thermostat to match the specific HVAC system profile.

Advanced Settings Menu

HVAC System Configuration Options

System Type Selection

Options include Heat Pump, Air Conditioning, Furnace, and Electric Furnace types.

Additional Heater Element

Gas and Oil Furnace Fan Control

Temperature Control

Temperature Adjustment

Operating Modes

Fan Settings