To Next PageTo Next Page
Need help?Do you have a question about the CLIMAVENETA Accurate AX and is the answer not in the manual?
General| Brand | CLIMAVENETA |
|---|---|
| Model | Accurate AX |
| Category | Air Conditioner |
| Language | English |
Lists the documents provided with each air-conditioner unit.
Details the configuration options for direct expansion units.
Provides an overview of the unit's description, structure, and key components.
Explains the refrigerant circuit for AX and AW units.
Details the operation and features of AF series free cooling units.
Describes the operation and features of AD and AT dual fluid units.
Illustrates different air intake and outlet configurations for units.
Details the information found on the unit's rating plate.
Presents technical data for AX series air-cooled units.
Presents technical data for AW series water-cooled units.
Presents technical data for AF series free cooling units.
Presents technical data for AD series dual fluid units.
Presents technical data for AT series dual fluid units.
Details performance data for hot water re-heating systems.
Presents performance data for hot gas reheating coils.
Describes how to access the unit's main components via panels.
Provides guidelines for safely transporting and handling the unit.
Lists the dimensions and weights of various unit models.
Details requirements for correctly positioning the air-conditioner.
Specifies the necessary space for installation and maintenance.
Defines the operational temperature and humidity ranges for units.
Describes the optional base moulding for over unit configurations.
Explains air distribution requirements for under units.
Describes optional plenums for air intake and discharge.
Details optional dampers and front outlet accessories.
Describes soundproof plenums and direct free cooling plenums.
Details the free cooling base and connection kit accessories.
Information on optional air filters and their pressure drop.
Details the optional fresh air kit for mixing air.
Water connection details for AX-AW models, sizes 05-18.
Water connection details for larger models (sizes 20-90).
Specifies required water quality parameters for the system.
Guidelines for connecting condensers and using glycol.
Details the incrustation factor for heat exchangers.
Charts showing pressure drops for various water temperatures.
Provides recommendations for installing air condensers.
Specifies recommended pipe diameters for refrigerant lines.
Guides on selecting and installing oil separators.
Details the procedure for charging refrigerant into units.
Describes access to the electrical panel and cable connections.
Outlines power supply requirements and protection devices.
Specifies minimum cross-sections for power cables.
Provides electrical specifications for total unit power input.
Details power consumption for compressors, fans, heaters, and humidifiers.
Explains electrical connection for outdoor condensers and dry coolers.
Outlines the procedure for commissioning and testing the unit.
Provides guidelines for operating water-cooled units.
Describes the calibration process for thermostatic valves.
Lists the instruments, sensors, and alarms installed on the unit.
Identifies the locations of pressure test points on the unit.
Overview of calibration adjustments for control and safety devices.
Details calibration for pressure control valve, air flow, and filter sensors.
Describes the operation and connection of the temp/humidity probe.
Explains the operation of servomotors and water valves.
Details description, function, operation, and maintenance of SSB81/SSB61 actuators.
Details description, function, operation, and maintenance of SSC819/SSC619 actuators.
Describes SQX82/SQX62 actuators, including calibration.
Explains the LED indications for SQX62 actuator operating states.
Provides close-off values for 2-way valves.
Details the electric heaters, their wiring, and power stages.
Lists and illustrates the components of the humidifier system.
Explains the operating principle of the immersed electrode humidifier.
Describes the procedure for cleaning the steam cylinder.
Details the inspection and maintenance of fill/drain assemblies.
Specifies power supply and water limit values for humidifiers.
Describes the drain connection for humidifier and condensate.
Technical specifications and installation for standard condensate pumps.
Technical specifications and installation for high-temp condensate pumps.
Explains automatic switching between power supplies.
Covers routine maintenance tasks for unit operation.
Provides information for correct unit dismantling and disposal.
Addresses faults related to unit startup and temperature control.
Diagnoses problems related to ambient humidity and air flow.
Troubleshoots issues with compressor pressure and safety thermostats.
Addresses faults related to compressor suction pressure and system parameters.
