To Next PageTo Next Page
Need help?Do you have a question about the CLIMAVENETA ACCURATE AXO and is the answer not in the manual?
General| Brand | CLIMAVENETA |
|---|---|
| Model | ACCURATE AXO |
| Category | Air Conditioner |
| Language | English |
Details the air-cooled unit configuration with specific air outlet types.
Details the water-cooled unit configuration with specific air outlet types.
Lists all documents delivered with the air-conditioner unit.
Explains how digits define the unit's technical configuration and features.
Covers unit description, structure, compressors, fans, filters, and heat exchangers.
Details cooling coil, post-heating, humidifier, control, electrical, and refrigerant systems.
Describes the refrigerant circuit and air-cooled condenser for AX units.
Describes the refrigerant circuit and water condenser for AW units.
Explains airflow configurations for OVER and UNDER units based on intake/outlet positions.
Lists information found on the unit's rating plate.
Provides detailed technical specifications for AX air-cooled models and outdoor condensers.
Provides detailed technical specifications for AW water-cooled models and outdoor condensers.
Guides on accessing unit panels (front, side, back, inside) for maintenance.
Guidelines for lifting, storing, handling, and inspecting the unit upon delivery.
Lists dimensions (L, LI, H, P) and dry weights for various unit models.
Covers leveling, indoor installation, and the optional support frame.
Specifies the required space for maintenance and unit installation clearances.
Defines the operating temperature and humidity limits for the units.
Details the optional base moulding for A*O units, including dimensions and features.
Specifies requirements for air distribution, openings, and airflow in under units.
Dimensions for air outlets and bottom intakes on OVER versions.
Dimensions for air outlets and top intakes on UNDER versions.
Details intake plenums for UNDER versions (A*U and A*O).
Information on the optional motor-driven damper for units.
Provides dimensions for the front outlet plenum for A*O units.
Provides dimensions for the front outlet moulding for A*U units.
Diagrams and details of water connections for models 07-10 and 15-18.
Diagram and details of water connections for models 20-26-29.
Diagram and details of water connections for models 39-30-40-50.
Diagram and details of water connections for models 55-60-70.
Technical data for hot water coils, including capacity and flow.
Recommendations for water connections, insulation, and glycol effects.
Details incrostation effects and connecting to brazed plate condensers.
Illustrates suggested installation methods for air condensers with piping details.
Specifies diameters for internal and external refrigerant lines.
Explains condensate removal, humidifier drains, and available drain pumps.
Specifies required water characteristics for the humidifier supply.
Recommends power cable cross-sections based on length and current for safe installation.
Details procedures for emptying and charging refrigerant circuits, including vacuuming.
Provides power input data for unit versions, components, fans, and heaters.
Guides on accessing the electrical panel and connecting to mains power.
Instructions for accessing electronic boards with static discharge precautions.
