Need help?Do you have a question about the CLIVET AQUA SWAN 300 and is the answer not in the manual?
Safety and operational guidelines for users, including children and those with reduced capabilities.
Initial important information and warnings before installation or use.
Identification of potential hazards and risks associated with the unit's operation.
Instructions on what to do in case of breakdown or malfunction.
Common situations that present risks to people or things.
Risks associated with electrical connections and components.
Area where only authorized operators may work.
Hazards from contact with rotating parts like fans.
Precautions during unit handling to prevent accidents.
Risks related to refrigerant handling and potential leaks or explosions.
Risks associated with incorrect installation.
Risks from leaks or water projection due to hydraulic system defects.
Risks related to smoke, burning smells, and electrical isolation.
Prerequisites and safety measures before installation.
Checklist of items to complete before requesting unit start-up.
Procedures for checking the unit upon delivery.
Guidelines for safe and proper handling of the unit.
Key criteria for selecting the installation location.
Requirements for the electrical power supply outlet.
How to set up the condensate drain.
Requirements for water quality and hardness.
Detailed diagram of hydraulic connections.
Indicative plumbing diagram for the 190-300 models.
Critical factors for aeraulic connection design.
Guidelines for connecting air ducts for outdoor air intake and exhaust.
Wiring diagram for the 190L model.
Wiring diagram for the 300L model.
Description of the PCB input/output ports.
Details on power supply and earthing requirements.
Configuration of DIP switches on the PCB.
Important information before starting the unit.
General points to verify before and during start-up.
Steps for conducting a trial run of the unit.
Explanation of basic unit functions like setting temperature and modes.
General procedures and responsibilities for start-up.
A checklist of preliminary checks before unit operation.
Checklist for commissioning the unit.
Overview of the unit's display and buttons.
How to start up and shut down the unit.
Detailed list of alarm codes and their descriptions.
Explanations for common non-error display messages or behaviors.
Explanation of the various icons shown on the display.
Answers to frequently asked questions about unit display behavior.
Icon and buzzer indication for alarms and errors.
Information on unit self-protection mechanisms.
How the unit behaves when errors occur.
Common errors and their possible solutions.
Checklist for routine maintenance operations.
General guidelines for performing maintenance.
Procedure for replacing or checking the electric heater.
Procedure for replacing the magnesium sacrificial anode.
To Next Page
General