Need help?Do you have a question about the CLIVET WSAN-XIN 21-141 and is the answer not in the manual?
General| Model | WSAN-XIN 21-141 |
|---|---|
| Category | Heat Pump |
| Power Supply | 400V / 3Ph / 50Hz |
| Refrigerant | R410A |
| COP | 4.0 |
| Operating Temperature Range (Cooling) | -10°C to 46°C |
| Operating Temperature Range (Heating) | -15°C to 20 °C |
Unit designed to prevent injuries; read residual risk section.
Positioning, hydraulics, refrigerating, electrics, air must be by system designer.
Plan periodic inspection and maintenance to avoid costs.
Disable unit immediately; contact service; use original parts.
Units are external; fixed positions; limit vibration; choose safe, accessible location.
Heat pump produces water; eliminate condensation to avoid wetting pedestrian areas.
Check water quality; inadequate quality can cause issues.
Installer defines component type and position on system.
Install filter in water input, accessible for cleaning; do not remove.
Serial number label reports unit electrical data; refers to technical bulletin.
Refer to diagram, verify network characteristics, realize earthing, shelter cables.
Lay cables away from power cables; avoid electromagnetic interference.
Install isolator switch near unit; fix cables; avoid touching hot components.
Diagrams of electrical panels for different sizes.
Diagrams for customer connections to the electrical panel.
Checks before power supply: safety access, functional spaces, airflow, integrity, etc.
Steps for unit ON power supply: voltage, absorptions, fan operation, temperatures.
Verify ground connection; check conductors; control voltage and phase unbalancing.
How to set up different daily/weekly operating schedules.
How to enable and configure the Domestic Hot Water (DHW) function.
Explains navigation for operating modes and status menus on ambient keyboard.
Diagrams identifying the main components of the unit.
Diagram showing exploded view of spare parts for specific sizes.
Diagram showing exploded view of spare parts for specific sizes.
Diagram showing exploded view of spare parts for specific sizes.
Diagram showing exploded view of spare parts for specific sizes.
Identifies common risk situations not controlled by manufacturer.
Risks from incomplete/incorrect electrical connections, improper covers, earthing issues.
Risks from contact with transmissions or fans; padlock isolator.
Risks from safety valve expulsion, contact with flames, welding.
Table of technical data including capacities, power inputs, and flow rates for all sizes.
Cooling and heating operating range charts based on water and air temperatures.
Details and wiring diagram for the domestic hot water module.
Diagrams and parameters for boiler integration or replacement.
List of alarm codes, descriptions, and types (AUTO/Manual reset).
List of alarms specific to the electronic thermostatic driver.
To Next Page