Need help?Do you have a question about the CLIVET WSAN-XIN 20.2 and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Model | WSAN-XIN 20.2 |
| Refrigerant | R410A |
| Operating Temperature Range (Cooling) | 46°C |
| Power Supply | 400V/3Ph/50Hz |
Provides instructions for correct unit installation, use, and maintenance.
Details potential risks and the importance of qualified personnel for installation and maintenance.
Covers outdoor installation considerations and electrical line verification.
Advises on planning periodic inspection and maintenance to avoid costs.
Instructs to disable the unit immediately and contact a certified service agent.
Outlines the installer's role in training the user on unit operation and maintenance.
Details criteria for choosing installation places and avoiding airflow obstructions.
Details water quality features, acceptable values, and consequences of poor quality.
Details components and their positioning in the system for recommended connections.
Lists steps for making electrical connections, ensuring safety and proper procedure.
Details input terminal connections for the unit in multiple languages.
Guides on connecting a PC to the unit for configuration and monitoring.
Describes options for remote control unit interface and connection types.
Details Modbus/RS485 communication options, cable requirements, and LEDs.
Explains LonWorks communication options, cable types, and specifications.
Details BACnet IP communication options and related LEDs.
Lists checks to perform before starting up the unit, including safety precautions.
Outlines the sequence of operations for unit start-up with power ON.
Provides checks for the refrigeration circuit, including oil stains and pressure verification.
Details checks for the water circuit, ensuring it's clean, filled, and pressurized.
Covers checks for grounding, conductor tightness, voltage, and phase balance.
Explains how to access and set the demand limit parameter for power control.
Details how to access and configure climatic text parameters for temperature control.
Explains how to access and configure water reset parameters affecting setpoint.
Describes the ECOSHARE function for managing multiple units in a network.
Guides on accessing and modifying setpoint values for cooling and heating.
Describes how to set up weekly events for unit operation (Off, Eco, On, Recirculating).
Provides instructions on identifying, resetting, and managing unit alarms.
Lists various electrical circuit alarms, their numbers, names, descriptions, and categories.
Outlines recommended inspection frequencies and types based on unit usage.
To Next Page