Need help?Do you have a question about the CLIVET WSAN-XEE 122 and is the answer not in the manual?
Unique identification of the machine, essential for tracing features and components.
Manual purpose, expert personnel, local regulations, intended use, additional safety, regulations.
Highlights areas where only authorized personnel may operate.
Warns of risks from incorrect installation like leaks, shocks, fire, and irregular operation.
Covers risks like burning smells, contact with hot parts, and unskilled repairs.
Details risks of shock, fire from incorrect wiring, dust/water infiltration, and earthing issues.
Covers risks of gas escaping and contact with heat sources.
Advises checking for transit damage and completeness, noting any deficiencies.
Covers outdoor installation, safety valves, antivibration, anchoring, and site selection.
GENERAL, INTERCEPTING VALVES, PRESSURE AND TEMPERATURE INDICATOR, AUTOMATIC OR MANUAL ESCAPE VALVES, BLEEDING COCK, TUBE INSULATION, CONNECTIONS SUPPORTS, EXPANSION TANK.
LEAKAGE TESTS, RISK OF FREEZE, INTALLATION EMPTYING, FILTER, FLOW SWITCH, UNFREEZABLE LIQUIDS, ANTIFREEZE HEATERS, WASHING THE SYSTEM.
Presents electrical data like voltage, current, and power input for different unit sizes.
Details the step-by-step procedure for connecting the unit to the main power supply.
ON/OFF FROM REMOTE CONTROL, CHANGING FROM SUMMER TO WINTER USING THE REMOTE CONTROL, SECOND SET POINT FROM REMOTE CONTROL (ECO).
PRELIMINARY CHECKS, REFRIGERANT SYSTEM, WATER SYSTEM, ELECTRICAL SYSTEM.
IF THE CRANKCASE HEATERS ARE FITTED, VERIFY TENSIONS - ABSORPTIONS.
Illustrates the process of selecting and modifying parameters using the keypad.
General advice on alarms, pre-alarms, and faults, emphasizing identifying and removing causes.
Lists alarm codes, their descriptions, and reset types (Auto/Manual).
Defines overheating and provides tables for testing circuit operation.
Defines subcooling and provides tables for testing circuit operation.
OPERATING LIMITS (COOLING), EXTERNAL EXCHANGER, INTERNAL EXCHANGER.
OPERATING LIMITS (HEATING), EXTERNAL EXCHANGER, INTERNAL EXCHANGER.
To Next Page
General