Need help?Do you have a question about the CLIVET WSAN-XEE 262 and is the answer not in the manual?
Significance of the serial number for tracing unit features and ordering spare parts.
Explains the summer and winter cooling cycles of the heat pump.
Instructions for starting the unit, including external enabling.
Procedure for identifying alarms and resetting them after resolving the cause.
Details risks from incorrect installation and electrical system faults.
Safety warnings for moving parts and potential hazards from refrigerant.
Step-by-step instructions for connecting the unit to the main power supply.
Adjusting set-point based on external temperature or enthalpy for efficiency.
Essential preliminary checks before initiating unit start-up.
Verification of refrigerant, water, and electrical systems before operation.
Ensuring proper operation of crankcase heaters and voltage parameters.
Detecting and recording operational conditions of the refrigerant circuit.
Details on unit operation modes: ON/OFF, Cooling, Heating, ECO.
Explanation of how the unit regulates temperature based on outlet temperature.
How the unit prevents ice build-up and details on circulation pump function.
Explanation of keypad functions for display, alarms, and parameter modification.
List of accessible parameters and the procedure for modifying them.
Operating the status display and understanding different alarm classifications.
Critical warning on alarm resets and information on handling faults.
Table listing alarms, their descriptions, and whether they are auto or manually reset.
Detailed checklist for periodic maintenance inspections.
Diagnosing high/low pressure alarms in cooling and faulty probes.
Troubleshooting compressor, fan, and pump protection activations.
Diagnosing high and low pressure alarms during heating operation.
To Next Page
General
