Need help?Do you have a question about the CLIVET WSAN-XIN Series and is the answer not in the manual?
Procedures for immediate deactivation and contacting service agents.
Installer must train the user on operation, settings, and breakdown procedures.
Criteria for selecting installation place and avoiding airflow obstacles.
Features of water quality and acceptable values.
Steps for connecting hydraulic lines.
Defines components and position in system for connections.
Steps for filling and washing the hydraulic system.
Information on unit electrical data from serial number label and plate.
Steps for electrical connection, isolation, and earth connection.
Wiring diagram and terminal descriptions for customer connections.
Steps for connecting and configuring a PC to the unit.
Options for remote control connection and user interface.
Cable requirements and connection details for Modbus/RS485.
Cable types and specifications for LonWorks communication.
Communication details for BACnet IP.
Checks before accessing electrical panel and unit off power supply list.
Steps for unit ON power supply and checks.
Checks for oil stains, pressure, and valve status.
Checks for system cleaning, filling, pressure, and antifreeze.
Checks for ground connection, conductor tightness, voltage, and phase balance.
Menu access, parameter modification caution, and external signal control.
Parameter modification caution and setpoint definition by temperature curve.
Water reset correction affects setpoint; only if EnWaterReset is active.
Max units, bus line length, cable type, and connections for group management.
Identifies operating conditions for unit control over time.
Procedures for identifying, resetting, and managing alarms.
Lists electrical circuit alarms and their categories.
Continues the list of electrical circuit alarms.
Continues the list of refrigerant circuit alarms.
Lists hydraulic circuit alarms and their categories.
Maintenance by authorized centers or qualified personnel.
Risks of improper electrical connections, covers, and earthing.
Risks from safety valve expulsion and contact with heat sources.
To Next Page
General