Need help?Do you have a question about the CLIVET WBAN 81 and is the answer not in the manual?
Explains the heating cycle and how the heat pump works in winter.
Describes the components and flow of the water circuit in the system.
Defines the specific purpose for which the unit is designed.
Highlights hazardous zones around the unit accessible only to authorized personnel.
Precautions for safe unit handling and installation procedures.
Covers general hazards and specific electrical system risks.
General considerations for installing air-conditioning systems and their components.
Essential checks before initiating unit start-up.
Verifying refrigerant and water circuits for leaks, pressure, and preparation.
Verifying electrical connections, grounding, and voltage.
Procedures for activating crankcase resistances before start-up.
Lists alarm codes, their causes, and reset procedures (automatic/manual).
Lists causes and solutions for faulty probes.
Identifies issues with pressure transducers and their resolution.
Explains compressor protection triggers and possible causes.
Lists common causes for high and low pressure alarms.
Lists causes for fan and pump protection alarms.
Explains the heating cycle and how the heat pump works in winter.
Describes the components and flow of the water circuit in the system.
Defines the specific purpose for which the unit is designed.
Highlights hazardous zones around the unit accessible only to authorized personnel.
Precautions for safe unit handling and installation procedures.
Covers general hazards and specific electrical system risks.
General considerations for installing air-conditioning systems and their components.
Essential checks before initiating unit start-up.
Verifying refrigerant and water circuits for leaks, pressure, and preparation.
Verifying electrical connections, grounding, and voltage.
Procedures for activating crankcase resistances before start-up.
Lists alarm codes, their causes, and reset procedures (automatic/manual).
Lists causes and solutions for faulty probes.
Identifies issues with pressure transducers and their resolution.
Explains compressor protection triggers and possible causes.
Lists common causes for high and low pressure alarms.
Lists causes for fan and pump protection alarms.
General| Refrigerant | R410A |
|---|---|
| Weight (Indoor Unit) | 45 kg |
| Type | Air-to-Water |
| Power Supply | 230V/1Ph/50Hz |
| Operating Temperature Range (Cooling) | 10-46 °C |
| Operating Temperature Range (Heating) | -15-24 °C |
To Next Page
