Need help?Do you have a question about the CLIVET WSAT-XEE 302 and is the answer not in the manual?
Explains the importance of the serial number for unique machine identification and tracing specific features.
Specifies the designed purpose of the unit for cooling/heating water for air-conditioning.
Highlights essential safety measures to prevent risks to persons and health hazards.
Identifies zones around the unit where only authorized personnel may operate.
Details risks associated with incorrect installation, including leaks and electrical hazards.
Details factors to avoid for correct operation, including air flow, heat sources, and wind.
Measures to prevent freezing of water in the unit and connections, using glycol or heating.
Emphasizes the need for specialized personnel and adherence to regulations for electrical work.
Step-by-step instructions for connecting the unit to the main power supply safely.
Essential checks before unit installation and start-up to ensure safety and compliance.
Checks for oil stains, pressure, and proper sealing of the refrigerating circuit.
Verifies screw tightening, grounding, panel repositioning, and voltage conformity.
Checks fluid temperatures, voltage, phase balance, and total unit absorption during operation.
Guidance on understanding and resetting alarms, differentiating between pre-alarms and faults.
Lists potential causes for high pressure alarms in cooling mode.
Lists potential causes for low pressure alarms in cooling mode.
Troubleshooting steps for faulty or disconnected probes.
Troubleshooting steps for faulty pressure transducers.
To Next Page
General