Need help?Do you have a question about the CLIVET WSAT-XEE 452 and is the answer not in the manual?
Information on unit installation, use, and maintenance procedures.
Procedures for safe unit handling and lifting operations.
Installation guidelines, vibration limits, and site considerations.
Diagram and list of recommended water circuit connections.
Measures to prevent freezing risks in water connections.
Electrical installation requirements and safety considerations.
Overview of electrical panel components and their functions.
Wiring diagrams for customer-specific electrical connections.
Steps for electrical connections and pre-start verification.
List of essential checks to perform before unit startup.
Verification points before performing the startup procedure.
Importance of oil resistances before compressor start-up.
Step-by-step operations for unit startup.
Checks on the refrigerant circuit prior to startup.
Checks on the hydraulic circuit prior to startup.
Calculating and checking water flow rate and pressure drops.
Verification of electrical connections and phase balance.
Explanation of display elements and parameters.
Navigation through the main menu for settings and status.
Procedure for viewing, identifying, and resetting alarms.
Accessing maintenance functions and system objects.
Table detailing alarm codes, descriptions, and types.
Continuation of alarm codes and their associated parameters.
Further alarm codes and descriptions for various conditions.
Status codes and descriptions for the central module.
Status data for refrigerant circuit 1, including inputs and commands.
Basic operations: ON/OFF, ECO, mode, and setpoint changes.
Overview of various risk categories, including handling, installation, and electrical hazards.
To Next Page
General