Need help?Do you have a question about the CLIVET WSAT-XIN 131 and is the answer not in the manual?
Highlights potential hazards from improper installation, maintenance, or by inexperienced personnel, causing damage or injury.
Outlines considerations for positioning, hydraulics, electrics, and ducting as per system designer and local regulations.
Recommends periodic inspection and maintenance to avoid costs. Advise to turn off unit before operation.
Instructs to disable unit, contact authorized service agent, and use original spare parts.
Details steps for handling, including verifying weight, identifying critical points, protecting the unit, and hoisting.
Lists criteria for choosing installation sites, including external fixed positions, vibration limits, accessibility, and avoiding obstacles to airflow.
Details required water features and potential issues from poor quality, advising on treatment systems and warranty exclusion.
Specifies project water flow requirements for exchanger limits and variable system conditions.
States the installer must define component type and system position, referencing dimensional drawings.
Provides a numbered list of steps for making electrical connections, emphasizing safety and verification.
Shows diagrams of the electrical panels for different unit sizes and lists component functions.
Lists essential pre-checks before unit power supply, covering safety, functional spaces, and system integrity.
Details the step-by-step sequence for unit ON power supply, including voltage, fan, and temperature checks.
Instructs on checking the refrigeration circuit for oil stains, pressure, and valve status, with safety warnings.
Covers connecting the hydraulic system, checking for air, and managing antifreeze solutions and their parameters.
Guides on connecting to the ground, checking conductor tightness, and adjusting phase balance for safety and performance.
Lists alarm codes, descriptions, and types, with reset information and warnings.
Outlines setting up to three different schedulings, associating events, and assigning schedulings to days of the week.
States maintenance must be done by authorized personnel to maintain efficiency and lifespan, with pre-check safety instructions.
Illustrates and labels the main components of the unit for sizes 21-71.
Illustrates and labels the main components of the unit for sizes 81-141.
Details how to clean the air coil, emphasizing safety precautions and proper cleaning direction.
Explains the importance of cleaning the water side exchanger and the procedure for checking and cleaning it.
Lists alarm codes, descriptions, and types, with reset information and warnings.
Details alarms related to the electronic thermostatic driver, including fault codes and types.
Details risks associated with electrical connections, sizing, protective devices, covers, and earthing systems.
Discusses risks from refrigerant expulsion, contact with flames, and heating of pressurized circuits, emphasizing safety clothing.
Details compressor types, oil charge, and refrigerant charge for various unit sizes.
Displays operating range graphs for cooling mode, showing Twu vs Tae for different unit series and operating conditions.
Shows dimensional drawings and weight specifications for PREMIUM version units sizes 81, 91, and 101.
Shows dimensional drawings and weight specifications for PREMIUM version units sizes 121, 131, and 141.
Shows dimensional drawings and weight specifications for EXCELLENCE version units sizes 21, 31, and 41.
Shows dimensional drawings and weight specifications for EXCELLENCE version units sizes 51 and 71.
Shows dimensional drawings and weight specifications for EXCELLENCE version units sizes 81, 91, and 101.
Shows dimensional drawings and weight specifications for EXCELLENCE version unit size 121.
Shows dimensional drawings and weight specifications for EXCELLENCE version units sizes 131, 141, and 151.
Shows dimensional drawings and weight specifications for EXCELLENCE version units sizes 161 and 171.
To Next Page
General