To Next PageTo Next Page
Need help?Do you have a question about the Closet Maid 1621 and is the answer not in the manual?
Identifies the product as the CLOSETMAID® Angled 2 Bin, model 01-85358-00.
Manufacturer warranty covers missing/damaged parts due to defects for one year. Proof of purchase required.
Identify parts by locating stickers or stamps on unfinished edges for easier assembly.
Secure unit to wall, supervise children, avoid overloading, and do not climb on unit.
Use part identification and exploded view to identify all components before assembly.
Ensure cam lock arrow points to hole and push cam post into hole until fully tightened.
Assemble on a soft surface and hand-tighten screws to prevent damage.
Insert dowels and cam posts into designated holes and secure cam locks.
Insert cam locks and cam posts into panels A, F, and C, ensuring proper orientation.
Assemble front panel to side panels using cam locks and tighten cam locks clockwise.
Place bottom panel and center divider, securing cams in cam locks as shown.
Use threaded fastener to attach center wall, then secure top panel using cams.
Place back panel and nail sides, top, and bottom panels using the nail tool.
Locate wall stud, use L-bracket and screws to anchor unit securely to the wall.
Insert dowels into top holes, place second unit, secure. Do not exceed 72" height.
General| Product Type | Closet Organizer |
|---|---|
| Color | White |
| Brand | ClosetMaid |
| Model Number | 1621 |
| Adjustable Shelves | No |
| Material | Steel |
