1.3 - In line with the image below, lay the power cable along the
top of the front windshield, down pillar A and around the glove
compartment on the passenger side, ending at the cigarette lighter
port.
1.4 - Adjust the angle of the camera to ensure correct positioning.
This can be seen via the smartphone application.
2. REAR CAMERA INSTALLATION:
2.1 - Take the electrostatic
sticker from the box and place it
onto the rear windshield in the
recommended position, as shown
on the right.
Please wipe the glass before
installation and squeeze the
bubbles between the static paste
and the glass during installation.
A
Centre position of rear windshield
To Next Page
Loading...