A total of 1482 ms of delay can be freely shared between the
main amplifier channels and the auxiliary outputs. Delay can be
assigned in terms of meters and feet as well as time.
The amplifiers have built-in fault monitoring and logging facilities.
Additionally, with the optional WM monitor card, each channel
can have its test signal frequency defined, together with load
impedance and test tolerance. Impedance tests may be scheduled
to run at user-selectable intervals and at specific times of day.
Amplifier power-on/power-off times and over-temperature are
also recorded; an event log is maintained for record-keeping
purposes.
To Next Page
Loading...
Need help?
General
