Pin # Function
5 Not used
6 RX/TX-
7 Not used
8 Not used
IMPORTANT: The auto-MDIX feature is always activated on the CloudGate. This feature
automatically detects the required cable connection type (straight or crossed), and
configures the connection appropriately, removing the need for crossover cables.
In order for auto-MDIX to work correctly, auto-negotiation (auto speed and auto
duplex) must be enabled on both sides of the link. Note that auto negotiation is always
active on the CloudGate.
Powered by TCPDF (www.tcpdf.org)
11
To Next Page
Loading...