the shield to the back side of the device as the picture shows.
Connect the supplied power cable to the unit’s charging port,
then
connect the power adapter into an AC outlet to start charging.
❑ Charging when the unit is off, the power LED will be green and
auto turn off when fully charged. A full Charge will take about 3
hours and will support the unit working for about 4-5 hours.
❑ Charging when the unit is on, the power LED will keep green.
❑ When the unit is on without charging, the power LED will be
green when the battery level is high and will be red when the
battery is dying.
❑ In the Sleeping Mode, the power LED will keep yellow.
The battery can be separated and detachable from the device.,
which is very convenient to be exchangeable.
Step 1
To Next Page
Loading...