IMPORTANT for UK Power Adapter Cord
If the available socket outlet is not suitable for the plug supplied with this equip-
ment, it should be cut o and an appropriate three pin plug itted. With alterna-
tive plugs on approved 3 amp fuse must be itted in the plug or adaptor or in the
main fuse box.
The plug severed from the mains lead must be destroyed, as a plug with bared lex-
ible cords is hazardous if engaged in a live socket outlet. In the event of replacing
the plug fuse, use a 3 amp fuse approved by ASTA to BS 1362, i.e. carries the
mark. Always replace the fuse cover, never use plugs with the fuse cover omitted.
WARNING — THIS APPLIANCE MUST BE EARTHED.
The wires in this mains lead are coloured in accordance with the following code:
Green-and-Yellow = Earth Blue = Neutral Brown = Live
As the colour of the wiring in the mains lead of this appliance may not corre-
spond with the coloured markings identifying the terminals in your plug, proceed
as follows:
• The wire which is coloured Green-and-Yellow must be connected to the
terminal in the plug which is marked with the letter “E”, or by the earth symbol
or coloured Green-and-Yellow.
• The wire which is coloured Blue must be connected to the terminal which is
marked with the letter “N” or coloured Black or Blue.
• The wire which is coloured Brown must be connected to the terminal which is
marked with the letter “L” or coloured Red or Brown.
Argentina
Este producto utiliza para su
funcionamiento una fuente de alimentación,
modelo FSP040-RHBN3 marca Clover con las
siguientes características técnicas: Entrada:
AC 100-240 V, 50-60 Hz, 1.5 A, Cl. I; Salida: DC
12 V, 3.33 A, que ha sido certiicada para su
utilización en el mercado argentino.
Conectar una fuente
diferente a la provista
podría ocasionar un
incendio o choque
eléctrico. No utilice una
fuente diferente a la
provista con el equipo.
To Next Page
Loading...
Need help?
General
