©2024 Clover Network, LLC | Clover Confidential | Fiserv Internal Use Only
Order instructions: Create a message that will show up on the ‘thank you’ screen once a
customer has paid for their order, which will then guide them on how to retrieve it when it’s
ready.
Payment threshold for offline payments: Create a limit for allowing payments if the device
loses service and goes offline.
Tips: Configure in Setup app or on your dashboard. Set a passcode for yourself as owner or a
passcode for employees. Log in using a passcode and choose whether to receive all of the tips
or distribute them evenly. Adjusting tips for Kiosk will affect all Clover devices’ tip settings.
Set up order receipt printing
Add an order receipt printer to your Kiosk:
1. If you’re in kiosk mode, long press the Clover logo in the bottom left corner and select
Exit kiosk mode to return to the home screen.
2. Select the Printers app where you can add a new printer by tapping the plus icon.
3. Select Order Printer.
4. Select the order printer(s) you would like associated with your Kiosk. Then, tap the
printer to open the settings.
5. Assign printer labels to the printer. This is very important for properly routing orders
from the Kiosk. If you do not have printer labels set up, check out this article here for
assistance.
Send order receipts to a single printer:
1. Once a printer is added, exit the Printers app and open the Setup app.
2. In the Setup app, select Order Receipts.
3. In Order Receipts select How will order receipts be printed in Register?
4. Under Auto printing > What to print, select All items. Under When to Print, make
sure When customer receipts are printed is selected.
5. Select Save.
Send order receipts to multiple printers:
1. Once your printers are added, select a printer to assign labels to it.
To Next Page
Loading...