Clover Mobile - Manage Device Settings and PINs; Change Device Reboot Time; Employee PIN and Login Management


Set up the Hardware
Plug in the cables for your Clover Device
1. Plug in Clover Mobile’s USB outlet to a nearby wall outlet
2. Plug in Clover Mobile’s microUSB connector to the Clover Mobile port
3. Press and hold the Power button to turn on Clover Mobile. You will know Clover Mobile
is on when the Clover logo appears on the front screen.
P2PE Implementation Manual for PCI P2PE v2.0 Clover Network, Inc. April 2018
© 2018 Clover Network, Inc. All Rights Reserved. Page 7