7Clover Mobile Install Guide — US 1.10
Change Reboot Time and Employee PINs
Change Reboot Time on Clover Mobile
Clover Mobile needs to restart once every 24 hours to install any necessary
updates for your Clover system. Please select a reboot time that will not be
disruptive to your business.
1. Swipe down from top-right of the device (near the clock).
2. Tap Settings.
3. Scroll down to About Mobile.
4. Tap Reboot time.
5. Set a time and tap Done.
About Employee PINs
A PIN allows you to provide different permissions levels to different employ-
ees, as well as track their activities.
You may choose to operate without a PIN, however the PIN-less login does
not allow for advanced functionality associated with an owner.
To Set Up or Change a PIN
1. Tap the Employees app from the homescreen of your Clover device.
2. Tap the Employee name.
3. Tap the Edit button.
4. Type in either a four or six digit PIN.
5. Tap Set Employee PIN when done.
6. Repeat steps for any additional employees.
To Allow Login Without a PIN
1. Tap the Employees app from the homescreen of your Clover device.
2. Tap the Setup button.
3. Select the Allow unlocking your Clover Mobile or Mini without a PIN
(as “Employee”) option.
4. Tap Done.
If logged in without a PIN, you
can access the owner func-
tionalty by tapping the lock
icon on bottom-right of device
and tapping Enter PIN.
NOTE
You can change employee PIN
length to either 4 or 6 digits in
the Employees app’s Setup tab
in the Web Dashboard.
NOTE
To Next Page
Loading...
Need help?
General
