9 / 17
connected interface, the current firmware version, and the serial
number of this product.
1. MIDI Routing Settings
Click the input port name on the left to select the port, then click
the output port on the right to assign a new route (click again to un-
assign). An input port can be assigned to several output ports, and
an output port can also be assigned to several input ports.
If you want to set up the USB port, please select the checkbox
beside "Show advanced routing" to open the advanced setting
interface.
Note: All routing settings will be automatically saved to the internal
memory of the U6MIDI Pro.
To Next Page
Loading...
