6 / 15
CONNECTION
1. Connect the U2MIDI Pro to the USB-A port of your computer. If
the computer does not have a USB-A port, you can use the
corresponding adapter cable (not included) or a USB HUB. After
connecting, the green LED indicator of the U2MIDI Pro will light
up and the computer will automatically recognize the device.
2. Connect the white 5-pin connector [TO MIDI OUT] of your
U2MIDI Pro to the MIDI Out or Thru of your MIDI device. Next,
connect the black 5-pin connector [TO MIDI IN] of your U2MIDI
Pro to the MIDI In of your MIDI device.
Note: Only one MIDI plug can be connected to the MIDI device according to
actual needs.
3. Open the music software on your computer, set the MIDI input
To Next Page
Loading...
Need help?
General
