To Next Page

To Previous Page

5 / 15

words IN/OUT.

- When used as a standalone MIDI router, mapper and filter

without computer, connect this interface to a standard USB

charger or power bank through the matching USB cable to

start using the interface.

Note: Please choose a power bank with Low Power Charging mode (for

Bluetooth headphones such as AirPods, and fitness trackers) and does not

have automatic power saving function.

2. [TO MIDI OUT ➔] White connector

Please plug this connector into the MIDI OUT jack of an external

MIDI device to receive MIDI messages from the external MIDI device

on the computer.

3. [TO MIDI IN ➔] Black connector

Please plug this connector into the MIDI IN jack of an external

MIDI device to send MIDI messages from the computer to the

external MIDI device.

4. LED Indicators

U2MIDI Pro has a green LED indicator, which is used to indicate

the working status of the MIDI port and power supply respectively.

When the port has MIDI data being transmitted, the indicator light will

flash accordingly.

Other manuals for CME U2MIDI Pro

Questions and Answers:

Need help?

Do you have a question about the CME U2MIDI Pro and is the answer not in the manual?

General