16 / 16
⚫ The external sound module is not responding to the MIDI
messages created by the computer:
‐ Please check if the U6MIDI Pro is correctly selected as the MIDI
OUT device in your music software.
‐ Please check if you ever set up custom MIDI routing through the
UxMIDI Tools software. You can try to press and hold the button
for more than 5 seconds and then release it in the power-on
state to reset the interface to the factory default state.
⚫ The sound module connected to the interface has long or
scrambled notes:
‐ This problem is most likely caused by a MIDI loop. Please check
if you have set up custom MIDI routing via the UxMIDI Tools
software. You can try to press and hold the button for more than
5 seconds and then release it in the power-on state to reset the
interface to the factory default state.
⚫ When only use the MIDI port in standalone mode without
computer, can it be used without connecting the USB?
‐ The U6MIDI Pro must always be connected to a USB power
supply to work properly. In standalone mode you can replace
the computer with a standard 5v USB power source.
CONTACT
Email: support@cme-pro.com
Website: www.cme-pro.com
To Previous Page
Loading...