6 / 16
per output ports. This will eliminate unexpected long notes
from external devices.
- In the power-on state, press and hold the button for more
than 5 seconds and then release, the U6MIDI Pro will be
reset to the factory default state.
3. MIDI Input 1/2/3 Ports
These three ports are used to receive MIDI messages from
external MIDI devices.
Note: Depending on the user's settings for MIDI routing, the interface may
need to route incoming messages to multiple designated USB ports and/or
MIDI output ports. If messages need to be forwarded to more than two ports
at the same time, the interface will automatically replicate the complete
messages for the different ports.
4. MIDI Output 1/2/3 Ports
These three ports are used to send MIDI messages to external
MIDI devices.
Note: Depending on the user's MIDI routing settings, the interface may
receive MIDI messages from multiple designated USB ports and/or MIDI
input ports. If you need to send messages from more than two ports to a
MIDI output port at the same time, the interface will automatically merge all
the messages.
5. LED Indicators
U6MIDI Pro has a total of 6 LED green indicators, which are
used to indicate the working status of the 3 MIDI IN and 3 MIDI OUT
ports respectively. When a certain port has MIDI data being
transmitted, the corresponding indicator light will flash accordingly.
To Next Page
Loading...
Need help?
General