14 / 17
2. Upgrade WIDI Jack to the latest firmware. Then keep only one WIDI
Jack powered on.
Note: Please remember to avoid having multiple WIDI Jacks powered on at the
same time. Otherwise, they will be automatically paired one to one. This will
cause the WIDI App to fail in finding the WIDI Jack you want to connect to as
they are already occupied.
3. Set your WIDI Jack as “force peripheral” role and rename it.
Note 1: After the BLE role is set as “force peripheral”, the setting will be
automatically saved in the WIDI Jack.
Note 2: Click the WIDI Jack device name to be renamed. The new name will be
effective once restarted.
4. Repeat the above steps to set all WIDI Jacks to be added to the
group.
5. After all WIDI Jacks are set to the “force peripheral” role, they can be
powered on at the same time.
6. Click the "Group" menu, and then click "Create New Group".
7. Enter the name of the group.
8. Drag and drop the WIDI Jack to the central and peripheral positions.
9. Click "Download Group". The setting will be saved in all WIDI Jacks.
From here on, these WIDI Jacks will be restarted and automatically
connect as the same group by default.
Note 1: Even if you power off the WIDI Jack, all the group setting status will still
be remembered. When you power them on again, they will be automatically
connected in the same group.
Note 2: If you want to forget the group connection settings, please use the
WIDI App to connect to the WIDI Jack with "Central" role and click "Reset
To Next Page
Loading...