CMS TX050 - User Manual

CNC Machining Centres
C.M.S. S.p.A.
Costruzioni Macchine Speciali
Via Antonio Locatelli, 49
(I) - 24019 ZOGNO (Bergamo)
Tel. (0345) 64.350 - Fax (0345) 64.330
Autore Fausto Zanardi C:\DATI\WORD\Refrigeratori\TexaProgTermFTX050.doc Pag. 1
Servizio Assistenza
T E X A C h i l l i n g U n i t
Electronic Thermostat TX050
Convert from Celsius to Fahrenheit
=====================================================================
(english)
Created date 28/01/2015 10:55:00
Last saving date 28/01/2015 11:55:00
1.01 The Display normally shows the internal electrical cabinet temperature,
to get into the parameters’ area, press simultaneously the buttons:
and
Keep them pressed as long as (around 7 seconds) to get the parameter
H
H
y
y
1.02 Release the buttons than press them again as long as to get the word
L
L
2
2
WARNING: If no buttons are pressed within 10 seconds, the unit exit itself
the parameters’ area, showing back the cabinet temperature
1.03 Release the buttons,
The Display shows parameter
H
H
y
y
1.04 Select the parameter
C
C
F
F by playing on button or button
1.05 Hit the button
The Display shows the parameter’s value which is
C
C
°
°
1.06 Select
F
F
°
° by playing on button or button

Summary

TEXA Chilling Unit TX050 Operation

Enter Parameter Adjustment Mode

Press SET and UP buttons simultaneously to enter the parameter adjustment area.

Navigate to Hy Parameter

Press SET and UP buttons again to reach the Hy parameter.

Select Unit Conversion Parameter (CF)

Use Up/Down buttons to select the CF parameter for temperature unit conversion.

Set Temperature Unit to Fahrenheit

Set the temperature unit to Fahrenheit (F) by pressing SET and then Up/Down buttons.

Confirming and Setting Other Parameters

Confirm Unit Setting

Press the SET button to confirm the selected temperature unit setting.

Setting Additional Parameters

Procedure for setting other parameters like LS and US according to the provided list.

CMS TX050 Specifications