Preparation
- 5 -
13 FM ST LED for FM Stereo
14 FM ANT Radio antenna
15 PROGRAM Program mode
16 USB JACK Port for USB stick / Mp3 player
17 Battery compartment
8 x 1,5V, UM-2/C/LR14
18 AC 230 Volt
4. Preparation
4.1. Connection with cable
Follow these steps to connect the system:
1. Connect the mains power cable first to the system and
then to a wall outlet.
4.2. Operation with batteries
1. Open the battery door and insert 8 batteries (1,5V, UM-
2/C/LR14).
Please observe correct battery polarities.
When the set is not used or is only used with “AC”,
please remove the batteries, to avoid damage to set
from leakage of batteries.
To Next Page
Loading...
