CD player
Version 1 cmx® MSC 7460 Seite 13 von 16
Repeat the previous 2 Steps, each time selecting any track
number of your choice to be stored in the successive
memory (program) positions.
After each track number, remember to press the
“PROGRAM” key.
After a maximum of 21 songs (or less) have been selected
as described above, press the “PROGRAM” key.
Also, the “P” symbol will remain “on” to indicate that you
saved a program-memory (sequence).
Pressing “PLAY/PAUSE” key will now play back the “saved
sequence” in the program memory.
Pressing “NEXT/BACK” will move to the next or previous
song in the saved sequence.
To clear (cancel) the entire program which is stored in the
memory, simply press “STOP”, or switch off the set.
To Next Page
Loading...