- This Manual is written for an expert technician to
provide the technical information required to per-
form repair operations on this machine.
- Please read carefully this manual for the correct
information regarding the repair procedures.
- For any question or comment, or in case any
error regarding the content of this manual is
found, you are asked to please contact:
CNH ITALIA S.p.A.
Strada Settimo, 323
San Mauro Torinese (TO)
10099 ITALIA
PARTS & SERVICE
Fax ++39 011 0077357
TO THE READER
SYMBOLS
This manual includes safety warning symbols and indications to recall the attention on possible personal
injuries or damages to the machine.
This symbol recalls the attention to points relative to safety.
When you see this symbol, it is necessary to proceed with attention since there is the possibility of
personal injuries.
Comply scrupulously with the precautions identified by this symbol.
The safety warning symbol is also used to attract attention to the weight of a component or a part.
To prevent personal injuries or damages, make sure that the appropriate lifting equipment and
techniques are implemented when handling heavy loads.
!
IN--1
FOREWORD
Find manuals at http://best-manuals.com/search?&s=NH-87659057A
To Next Page
Loading...
