ITEM : 202393
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 10 MINUTES
A 1PC
NOTE :
Phillips head screw driver is required in the assembly process ; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PARTS IDENTIFICATION
DRESSER
PAGE 2 OF 5
To Next Page
Loading...
