Coaster 205263 - User Manual

Need help?

Do you have a question about the Coaster 205263 and is the answer not in the manual?

Summary

Assembly Instructions

Assembly Tips

Provides guidance on preparing for and conducting assembly, including hardware sorting and parts verification.

Safety Warnings

Alerts users to critical safety precautions, such as avoiding repair of defective parts and intended use.

Parts Identification

Identifies the main component of the product, the 'Dresser', and its quantity.

Assembly Step 1 & 3

Illustrates key steps for assembling the top and bottom drawers of the dresser.

Anti-Tipping Installation Instructions

Furniture Tipping Restraint Warning

Highlights the risk of injury from tipping furniture and the protective role of the restraint.

Step 1: Attach Bracket to Furniture

Guides attaching a bracket to the furniture's back rail using a short screw.

Step 2: Attach Bracket to Wall

Instructs on securing the second bracket to a wall stud using a long screw.

Step 3: Secure Restraint Strap

Details lacing the restraint strap through brackets and tightening to prevent slack.

Product Dimensions

Drawer Inner Dimensions

Specifies the internal measurements for Drawer A and Drawer B.

Overall Furniture Dimensions

Presents key exterior measurements of the dresser, including width, depth, and height.

This document provides assembly instructions and specifications for the Coaster Fine Furniture 205263 Dresser.

Function Description

The 205263 Dresser is a piece of fine furniture designed for home use, intended for storing various items within its multiple drawers. It is a standalone unit that requires assembly and includes an anti-tipping restraint for safety. The dresser is part of Coaster Fine Furniture's product line, emphasizing quality and design for different stages of life.

Important Technical Specifications

Dimensions:

Overall Dimensions:
- Width: 66.12 inches (top surface), 64.17 inches (base)
- Depth: 17.99 inches (top surface), 17 inches (base)
- Height: 38.03 inches
Drawer Inner Sizes:
- Drawer A (Top Drawers): 3.93 inches (height) x 13.58 inches (depth) x 27.20 inches (width)
- Drawer B (Bottom Drawers): 6.69 inches (height) x 13.38 inches (depth) x 27.83 inches (width)
Specific Measurements:
- Distance from floor to bottom of dresser: 3.93 inches
- Height of top drawer face: 4.72 inches
- Height of bottom drawer face: 7.0 inches
- Width of individual drawer sections (approximate): 29.17 inches (top), 29.40 inches (bottom)
- Overall depth of base: 13.85 inches
- Overall width of base: 59.60 inches

Materials: The document does not explicitly state the materials used (e.g., wood type, metal for hardware), but it is implied to be furniture-grade materials suitable for a dresser.

Hardware: The assembly process requires hardware that is included in the box. A Phillips head screwdriver is necessary for assembly but is not provided by the manufacturer.

Safety Features:

Anti-Tipping Restraint: The dresser includes an anti-tipping installment kit designed to prevent the furniture from tipping over. This restraint must be securely attached to a wall stud using the provided long screw.
Warning against climbing: Users are explicitly warned not to allow children to climb on the furniture.
Home Use Only: The product is intended for home use only and not for commercial establishments.

Revision History:

Revision 0: 07/27/2016
Revision 1: 11/20/2018
Revision 2: 11/08/2019

Usage Features

Assembly:

Estimated Assembly Time: 10 minutes (This is an optimistic estimate, as actual time may vary depending on skill level).
Step-by-step instructions: The manual provides clear, numbered steps with diagrams for assembly.
Hardware sorting: Users are advised to remove and sort hardware by size before starting assembly.
Part identification: A "Parts Identification" section lists the main components, in this case, "A - DRESSER," indicating 1 piece.
Drawer Installation: The assembly process involves installing both top and bottom drawers, as illustrated in "STEP 1" and "STEP 3" (referring to the drawer installation, not the overall assembly step number).

Anti-Tipping Restraint Installation:

Step 1 (Restraint): Attach one bracket securely to the back top rail of the furniture using a short screw through the smaller hole.
Step 2 (Restraint): Locate the second bracket on the wall over a wall stud, two inches below the furniture's mounting bracket. Attach it using the long screw through the smaller hole.
Step 3 (Restraint): Position the furniture so both brackets are vertically aligned. Lace the restraint strap through the larger hole in each bracket, then slide the flat end through the locking end and draw it tight until all slack is removed, ensuring it is securely laced and locked.
Warning: Failure to detach the restraint before moving the furniture may result in injury and damage.

Maintenance Features

The document does not explicitly detail maintenance features such as cleaning instructions or material care. However, general furniture maintenance practices would apply.

Warnings and Precautions:

Damaged Parts: Users are warned not to attempt to repair or modify broken or defective parts. Instead, they should contact the store immediately.
Proper Assembly: Following the attached instructions in the specified sequence is crucial for fast and easy assembly.
Adult Supervision: The anti-tipping restraint is not a substitute for proper adult supervision.

The dresser is designed with a classic aesthetic, featuring a rectangular top surface, multiple drawers arranged in two columns, and decorative detailing on the top edge and between the drawer rows. The presence of both "TOP DRAWER" and "BOTTOM DRAWER" in the assembly steps suggests different drawer sizes or configurations, which is confirmed by the "INNER SIZE OF DRAWER A" and "INNER SIZE OF DRAWER B" specifications. The overall design aims to provide functional storage while contributing to the aesthetic appeal of a room.