PARTS IDENTIFICATION
A
B
NIGHT STAND
LEG
1PC
4PCS
HARDWARE IDENTIFICATION
1
2
3
4
BOLT
LOCK WASHER
FLAT WASHER
ALLEN WRENCH
12PCS
12PCS
12PCS
1PC
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast and easy assembly.
Warning!
1.Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2.This product is for home use only and not intended for commercial establishments.
ITEM:205132
PAGE 2 OF 3
www.coastercompany.com
ASSEMBLY TIME 10 MINUTES
ASSEMBLY INSTRUCTIONS
NOTE: PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM
To Next Page
Loading...
