Coaster 400961T - Product Identification and Assembly Overview; Parts Identification

ITEM:400961T
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
A LEFT SIDE 1PC I DESK FRAME 1PC
B RIGHT SIDE 1PC J SHELF FRAME 3PCS
C
DESK FRONT
FRAME
1PC K DESK TOP 1PC
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
45 MINUTES
FRAME
D
DESK BACK
SUPPORT
1PC L SHELF 3PCS
E
SHELF FRONT
FRAME
1PC M LADDER 1PC
F
SHELF BACK
FRAME
1PC N PLATFORM 4PCS
G
SHORT SAFETY
RAIL
2PCS
H
LONG SAFETY
RAIL
1PC
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
PAGE 2 OF 8