Maverick Boat Company, Inc. • 3207 Industrial 29th St. • Fort Pierce,
Florida 34946 • (772)-465-0631 or (888)-shallow • Fax: (772) 489-2168
Electric Head
The macerator is to be used only with direct discharge thru hull. Macerator will not be used for dockside pump out of the
holding tank. To flush the head, make sure intake valve is in the open position. The intake valve is located under the lower
step. It is the valve on the left. This supplies your head with the water it will need to operate correctly. Then press the toilet
switch and the waste is pushed into the holding tank. The macerator has nothing to do with the flushing of the toilet. The
macerator is only used for overboard discharge while outside the legal dumping limits. To discharge outside legal limits, open
the thru hull discharge valve located directly across from the intake valve, turn the Y-Valve to the direction of the macerator,
and flip macerator switch to the “ON” position. The Y-Valve is located under the top step in the head unit.