Do you have a question about the COBIA 350 CC and is the answer not in the manual?
Essential safety items required by regulation and recommended for safe boating.
Requirements for visual distress signals and sound signaling devices for safety.
Safety requirements for ventilation and backfire flame control on gasoline engines.
Guidance on performing maintenance and repairs at authorized Cobia Dealers.
Instructions for washing, drying, and waxing the boat's exterior and fittings.
Explains the importance of engine break-in for new engines and refers to manufacturer's manual.
Details the function and proper use of the engine stop switch and safety lanyard.
Description of the helm switch panel for controlling boat functions.
Information on the standard Command Link Plus Display for engine data.
Location and function of Fuel-Water Separators for fuel filtration.
Recommendation for replacing the fuel filter based on operating hours and conditions.
Description and function of the garboard drain plug for hull drainage.
Instructions on how to access the bilge compartment via electronic lift assist.
Details on checking the bilge, pump function, float switch, and breaker reset.
Explanation of ball valve operation for controlling fluid flow.
Describes the deckdrain system and its ball valves for self-bailing the cockpit.
Details the components and operation of the livewell pump assembly.
Instructions for accessing the console and head, including gas shock operation.
Explains the DC main breaker panel for resetting electrical circuits and fuses.
Steps for operating the electric head, including intake, flushing, and holding tank use.
Details on correctly positioning the Y-valve for waste discharge or pump-out.
Description of the location and operation of cockpit courtesy lights.
Explanation of the battery switch panel for managing house and engine batteries.
Details on the telescoping boarding ladder, its use, and maintenance.
Guidance on prop selection and inspection for optimal boat performance.
Explanation of the Optimus EPS system, its components, and operation.
Information on the boat's fuel cell, fill receptacles, and potential issues.
How the cockpit drains overboard, keeping the boat dry.
Steps to operate the livewell for keeping baitfish healthy.
Description of the optional pump box for improved livewell efficiency.
Details on under-gunwale rod racks for storing fishing rods.
Information on hidden lockable rod storage within the console.
Description of insulated fish lockers connected to macerators for waste disposal.
Location and operation of macerator switches for fish box waste.
Description of the anchor locker for storing the anchor rode and chain.
Overview of the battery switch assembly and main breaker panel for system power.
Details on accessing the boat's batteries located under the helm seat.
Description of the helm seat tackle center, rigging station, and tackle storage.
Information on the standard stowable cushioned aft seating.
Details on the eight-piece bow cushion set and its use as a sun lounge.
Explanation of the electric table lift in the bow seating area and its operation.
Description of cockpit bolsters for comfort and additional rod holders.
Instructions for opening and closing the starboard side boarding door.
Information on the retractable bow light, cleats, and rope chocks.
Explanation of Lenco trim tabs for enhancing boat performance and balance.
Details on the fresh water system, tank capacity, and shower operation.
How to operate the salt water washdown system for cleaning.
Options for T-Tops including electronics box, spreader lights, and speakers.
Description of storage hatches located above the helm for electronics and PFDs.
Information on the JL Audio stereo system, speakers, and pre-wiring.
Details on the windlass system for anchor deployment and retrieval.
Critical warnings and instructions for safe operation of the windlass.
General tips for anchoring, including rode management and vessel positioning.
Instructions for tightening and slackening the windlass clutch for anchor operation.
Procedures for releasing the anchor using gravity and engine power.
Instructions for retrieving the anchor using the windlass.
Method for manually recovering the anchor using the clutch lever.
Guide on splicing rope to chain for anchor rode.
Explanation of the optional joystick control for 360-degree maneuvering.
Diagram showing the wiring connections within the boat's console.
Diagram illustrating the wiring harness layout on the boat's deck.
Diagram showing the wiring connections for the boat's hardtop.
Diagram illustrating the wiring harness layout within the boat's hull.
Diagram showing bunk placement and key measurements for the boat.
Guide for cleaning and caring for PERMAGUARD treated vinyl upholstery.
Instructions for cleaning vinyl coated fabrics and accent vinyls.
Details on the Cobia Boats limited warranty and recommended service.