Need help?Do you have a question about the COBIA 240 CC and is the answer not in the manual?
Essential safety items required by regulation for safe boat operation.
Suggested safety items for various conditions and enhanced preparedness.
Guidance on performing maintenance and repairs at authorized dealerships for optimal performance.
Instructions for washing, drying, and protecting the boat's hull, fittings, and trailer.
Importance of engine break-in for new engines and where to find specific instructions.
How the engine stop switch and safety lanyard function for emergency shutdown.
Description of the main switch panel and its functions, including lights and accessories.
Information on the standard 6YC Command Link gauge and its user-selectable display functions.
List of items provided in the Cobia duffel bag, including keys, manuals, and safety gear.
Details on the Yamaha fuel-water separator, its function, and replacement recommendations.
Instructions for the garboard drain plug, its design for easy removal, and checking for leaks.
Step-by-step guide to open the bilge access hatch using the electronic lift assist.
Procedure for manually disengaging the electronic lift for bilge access when power is unavailable.
How to check the bilge for water, signs of fuel/oil, and pump function.
Steps to diagnose and resolve issues if the bilge pump fails to operate.
Explanation of ball valve purposes, how to identify their position, and where they are located.
Description of the deck drain system, its thru-hull fittings, and how ball valves control water flow.
Components of the livewell pump assembly, including the strainer, thru-hull fitting, and ball valve.
Information on the three LED courtesy lights and their control switch.
Explanation of the engine and house battery switches, including emergency parallel use.
Instructions for using the telescoping boarding ladder, including cleaning and maintenance.
Guidance on prop selection, performance, and pre-launch inspection for damage or debris.
Details about the 125-gallon fuel cell, fill receptacle, and where to seek service for fuel issues.
Explanation of how the cockpit drains overboard, preventing standing water.
Steps to operate the 28-gallon livewell for keeping baitfish alive and healthy.
How to drain the livewell, clean it, and extend baitfish life through proper water flow.
Description of under-gunwale rod racks for storing fishing rods.
Details on the two 33-gallon insulated fish lockers and their drainage.
Location and independent operation of switches for the fish box macerators.
Steps to open the bilge access hatch to reach the macerator pumps for the fish boxes.
Location and accessibility of the anchor locker for rode and chain storage.
How Bennett electric trim tabs enhance performance and balance, and their control switches.
Operation of the 9.5-gallon freshwater system, including filling, pressurizing, and winterizing.
Details on the removable six-piece bow cushion set and care instructions.
Various T-Top options including electronics box, lights, speakers, and storage.
Information on the JL Audio Media Master 50 stereo system and speaker pre-wiring.
How the power assist pump reduces steering torque for a more pleasurable experience.
Key features including reduced torque, ease of installation, and compatibility.
Location of the windlass switch, solenoid, and how it interacts with the anchor locker.
Crucial safety instructions before operating the windlass to prevent accidents and damage.
Tips for anchoring, aiding recovery, and approaching the vessel to avoid damage.
How to secure the anchor rode to a bollard and secure the chain with a chain stopper.
How to tighten and slacken the windlass clutch for secure operation.
Procedures for letting go the anchor using gravity or power, and safety checks.
Guidelines for safely lying to anchor, managing rode slippage and loads.
How to haul the anchor using power or manual recovery, and securing the anchor.
Detailed instructions on splicing rope to chain for anchor rode.
How to use the salt water washdown system and important cleaning precautions.
Information on the portable head unit and its pump-out fitting for waste management.
Steps to prepare the portable toilet unit, including adding deodorant and water.
Instructions for flushing, emptying waste tanks, deodorizing, and cleaning.
Procedures for safely emptying the waste tank and cleaning the unit.
Recommended deodorants and cleaners for the portable toilet, with cleaning precautions.
Information on how to contact for parts, service, and warranty issues with Thetford.
A list of all parts for the portable toilet with corresponding numbers and descriptions.
How to operate the electric head for flushing and filling the holding tank.
Explanation of the Y-valve for directing waste to pump-out or overboard.
Diagram illustrating the flow of waste through the holding tank, macerator, and discharge.
How to set the Y-valve for deck pump-out or overboard discharge based on arrow indicators.
Diagram of the hull wire harness, identifying components like pumps, lights, and switches.
Diagram of the deck wire harness, showing connections for lights, speakers, and USB ports.
Diagram of the hardtop wire harness, detailing lights, speakers, and horn connections.
Diagram illustrating the fuel tank, separator, fill, and vent lines.
Diagram showing the various water drain lines, pumps, and tanks.
Diagram with dimensions related to hull bunk placements.
Diagram showing longitudinal dimensions related to hull bunk placements.
Information on PERMAGUARD's stain resistance and basic cleaning steps.
Recommended cleaning solutions and methods for vinyl coated fabrics.
Details of the 10-year limited warranty and advice on authorized dealer service.
To Next Page
General