When switched to NB position the RF Noise
Blanker is activated, providing increased noise
filtration.
When switched to OFF position Noise
Blanking Filtration will be turned off.
Operation
Operation
NB, OFF
(Noise Blanker)
Switch
RF Gain Control
Bright/Dim
Switch
RF Gain Control
The RF Gain is used to optimize reception in
strong or weak signal areas.
Bright/Dim Switch
Note
The RF Gain is used to optimize
reception in weak signal areas.
Turn counterclockwise to reduce
gain.
Note
The RF noise blanker is very
effective in reducing repetitive
noises such as ignition interfer-
ence.
Switch to BRT or DIM to control brightness
of the channel indicator and multi-function
meter for day or nighttime driving.
Rotate the RF Gain knob counterclockwise
to reduce gain in strong signal areas. In weak
signal areas turn clockwise to increase gain.
1
NB, OFF (Noise Blanker) Switch
1
1
To Next Page
Loading...
