Cobra 29 LTD CHR - Display and Gain Adjustments; Bright;Dim Switch Operation; RF Gain Control Usage

Operation
Operation
1716
RF Gain Control
Bright/Dim
Switch
RF Gain Control
The RF Gain is used to optimize reception in
strong or weak signal areas.
Bright/Dim Switch
Note
The RF Gain is used to optimize
reception in weak signal areas.
Switch to BRT or DIM to control brightness
of the channel indicator and multi-function
meter for day or nighttime driving.
Rotate the RF Gain knob counterclockwise
to reduce gain in strong signal areas. In weak
signal areas turn clockwise to increase gain.
1
1
29LTDCHR_MANL_vC.qx_29LTDDEJR_manual.qx 6/17/14 2:59 PM Page 16