To Next PageTo Next Page
Need help?Do you have a question about the Cobra 29 LX EU and is the answer not in the manual?
General| Type | CB Radio |
|---|---|
| Frequency Range | 26.965 - 27.405 MHz |
| Channels | 40 |
| Modulation | AM/FM |
| Power Output (AM) | 4 W |
| Power Output (SSB) | 12 W |
| Display | LCD |
| Microphone Connector | 4-pin |
| SWR Meter | Yes |
| RF Gain | Yes |
| Instant Channel 9 | Yes |
| Antenna Impedance | 50 Ohm |
| Power Supply | 13.8 V DC |
How to get help with product issues and understand features.
List of components provided with the transceiver.
Details of buttons, knobs, and indicators on the front panel.
Identification of rear panel connectors for antenna, power, etc.
Step-by-step guide for replacing the in-line fuse.
Instructions for replacing the fuse within the cigarette lighter plug.
Guidance on selecting the optimal placement for the transceiver.
Procedures for physically mounting the unit and connecting cables.
How to connect the transceiver to the vehicle's 12V power via lighter plug.
Detailed steps for hardwiring the transceiver to the vehicle's power.
Best practices for installing CB antennas for optimal performance.
Specific considerations for installing the transceiver on boats.
Information on identifying and mitigating electrical noise sources.
Initial steps to power on the CB radio and basic checks.
How to use the channel selector knob to change channels.
Procedure for adjusting antenna SWR for peak performance.
Completing the SWR calibration across all channels.
Basic steps to receive transmissions and monitor signals.
Understanding the S/RF meter for signal strength and transmission power.
How to transmit using the microphone and PTT button.
Adjusting microphone gain for clear outgoing audio.
Activating and deactivating the noise reduction feature.
Accessing and navigating the transceiver's menu system.
Configuring frequency bands and settings based on the country.
Instructions for setting the internal clock and timer functions.
How to configure the alarm clock functionality.
Procedures for setting and using the countdown timer.
Enabling or disabling audible feedback for button presses.
Performing diagnostic tests for battery, power output, and antenna.
Changing the color scheme of the LCD display.
Adjusting the illumination level of the LCD display.
Adjusting the contrast level of the LCD display.
Viewing software details or resetting the unit to factory defaults.
Using the Noise Blanker and Automatic Noise Limiter for noise reduction.
Optimizing reception by adjusting the RF Gain.
Storing specific channels for quick access.
Initiating a scan of all available CB channels.
Initiating a scan of only programmed memory channels.
Controlling display brightness for day and night use.
Fine-tuning the squelch to eliminate background noise.
Connecting an external speaker for improved audio clarity.
Instructions for operating the transceiver from a fixed AC power source.
Information on additional products available for purchase.
Legal statement confirming the product meets regulatory standards.
