OperationOperation
23
22
Weather
Channels
Weather Channels
Set Squelch Control (SQL) to desired setting
DSS.*See page 18 to set DSS.
All Channel
Scan
Note
The 75 WX ST will stop scan-
ning and monitor a channel
when it receives an incoming
transmission.Five seconds
after the transmission stops,
the 75 WX ST resume the scan-
ning function.
Press Scan key.Unit will start scanning.
Press any kep to stop scanning sequence.
When activity is found on a channel scanning
will stop.Scan icon will apear.
3
1
2
4
Press the CB/WX key.
The unit will change to the WX function and
a weather channel number will be displayed.
Press Up/Down Channel keys to locate the
weather station in your area.
Press the CB/WX key to return to a normal
CB channel.
3
1
2
4
75 WX ST Manual(5188) 2/5/01 3:00 PM Page 22
To Next Page
Loading...
