Cobra 75 WX ST - Turning on Your CB; Soundtracker System

Ro t ate the power
ON-OFF Volume
Co nt r ol cloc w i s e .
While previous sys t ems only “b l a n ked out”or
l i m i ted noise in higher sound fre q u e n c i e s,the
revo l u t i o n a ry new So u n d Tra c ker Sys t em act u a l l y
re d u ces noise while leaving the signal int a ct in
the re ception mod e .In the transmission mod e,i t
a ctually strengthens the signal,p roviding you with
a significa nt re d u ction in noise on re ception and
t ra n s m i s s i o n .
On Re ce p t i on–
“Cuts Noise Coming In”
With a normal CB,d i s t a nt signals fall be l ow
the squelch level and are uninte l l i g i b l e.With
a So u n d Tra c ker CB,the noise level is cut by up
to 90%,which increases the signal-to-noise
ratio and dra m at i cally improves signal clari ty.
This also allows you to significa ntly re d u c e the
squelch leve l ,which gre atly expands your
l i s tening ra n g e.
On Tra n s m i s s i on–
“St rengthens Signals Going Out”
A SoundTracker CB strengthens the transmit
signal by more effectively using the available
RF power output of the CB.The result is
improved transmission signal clarity and an
expanded transmission range.
Operation
11
Operation
Turning Your
CB On
Soundtracker
System
Selecting a
Channel
10
Turning On
Soundtracker System
Selecting a Channel
1
Tu r n the Sq u e l c h
Co nt rol co u n te r
c l oc kwise unt i l
noise is heard.
1
Adjust volume to a
co m fo rtable leve l.
1
Change channels by
p ressing either the
channel ▲ up or
channel ▼ d o wn key.
To quick-advance
channels,press and
hold either key.
1
2
Note
Sound clarity is measured by
the ratio of the signal level
to the noise level.The higher
the signal-to-noise ratio, the
better the sound.
75 WX ST Manual(5188) 2/5/01 3:00 PM Page 10