FCC
WARNING*
1.
Operation
of
this equipment requires a valid Station License issued by the
Federal Communications Commission. Do
not
transmit with your equipment
until
you
have received
your
License. Illegal operation can result in severe
penalties.
Be
certain
you
have read Part 95
of
the FCC Rules and Regulations.
before operating your station.
2. License applications are to be made on FCC Form 505, available from
your
nearest field office.
(A
copy
of
this form
is
included with your new COBRA
transceiver.)
3. You are required
to
maintain a current copy
of
Part 95
of
the FCC Rules,
as
part
of
your
Station records. Copies
of
Part 95 are available from the
Superintendent
of
Documents, GPO, Washington. D.C. 20402.
4. Your Station License
is
to be posted
in
accordance with paragraph 95.101
of
the Rules and
an
executed Transmitter Identification Card (FCC Form
452-C)
is
to be
attached
to each transmitter. (A copy
of
this form also
is
included with your new COBRA transceiver.)
5. FCC Rules require
that
ALL transmitter adjustments
other
than those
supplied
by
the manufacturer
as
front panel operating controls, be made
by,
or
under the supervision of, the holder
of
an FCC-issued
lst
or
2nd Class
Radio Operator License.
6. Replacement or substitution,
of
crystals. transistors, regular diodes or any
other
part
of
a unique nature. with parts
other
than those recommended
by
Dynascan, may cause violation
of
the technical regulations
of
Part 95
of
the
FCC Rules,
or
violation
of
the Type Acceptance requirements
of
Part 2
of
the
Rules.
*Excerpted from Part 95
of
the FCC Rules and Regulations.
5
To Next Page
Loading...
Need help?
General
