17
PART VII: Assembly Instructions
1. Remove from packing & fitting the wheel axle.
Use a block to support whilst securing and fitting the
axle for the transport wheels.
2. Wheel split pins fitting.
Fit with split pins just tight enough to get split pins in.
3. Fit the intake hopper
Fit the intake hopper and secure the bolts.
4. Fit the front resting plate.
Secure the front support with the bolts provided.
5. Fit the exit/discharge shoot
The shoot is fitted with 4 bolts – ensure these are fully
tightened and secure.
To Next Page
Loading...