Operation
Mode Functions
8
9
Nothing Comes Close to a Cobra
®
Set DCS Privacy Codes
•
To select a DCS privacy code:
1.
After selecting a channel, press the Mode/Power
button until the DCS icon appears and the small
numbers flash on the display (01 through 83).
2.
Press using the Channel Up or Channel Down button to select a DCS
privacy code. You can hold the Up or Down button for fast advance.
3.
When DCS privacy code is displayed, press the Mode/Power button
to enter the new setting and proceed to other functions, or press Talk
button to enter the new setting and return to Standby mode.
R
X
Vox
HI MED LO WX
TW DCS Scan
DCS Privacy Code
If CTCSS is turned on at the channel
selected, the display will flash the DCS
icon and “OFF.” To switch from CTCSS to
DCS, press the Channel Up or Channel
Down button while the display is flashing
“OFF.” The display will then show the
small numbers flashing and you will then
be able to proceed to step 2.
Customer Assistance WarrantyIntroduction
Operation
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
CHANNEL
Channel Button
Set High/Medium/Low (H-M-L) Power Button
•
Your radio can transmit selectively at 0.5, 1, or 2 watts of power Use
the low power setting for short-range communications and use the high
power setting for long-range communications.
To toggle between H-M-L Power Modes:
1.
Press the Mode/Power button until HI MED LO
icon appears.
2.
Press using the Channel Up or Channel Down
button to select between High/Medium/Low power.
3.
When the desired power is selected, press the
Mode/Power button to enter the new setting
and proceed to other functions, or press Talk
button to enter the new setting and return to
Standby mode.
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MEM
ESC
TRI
WATCH
SCAN
VOLUME
CALL
MODE
HI MED LO WX
TW DCS Scan
CTCSS Mem
BURP Power Saver
Hi/Med/Lo Icon
Channel 8 through 14 only operates on
Low power setting.
CXT1035R_MANL_vD.indd 9-10 2/28/14 9:58 AM
To Next Page
Loading...
Need help?
General
