16
Fig. 20 - Pull the starter grip lightly until you feel resistance, then pull quickly. Return the starter
grip gently. Repeat until the engine starts. Adjust the choke as required to avoid the carburetor
becoming flooded (Fig.19).
Once the engine has started, gradually move the ‘CLOSE’ choke lever to ‘OPEN’ as the engine
warms up.
For Lawnmowers with the Briggs and
Stratton Engine
Fig. 21 – Move the fuel valve to ‘ON’
Fig. 22 - For a cold engine move the choke
lever to the ‘CLOSE’ position. To restart a
warm engine leave the choke lever in the
‘OPEN’ position.
Once started gradually move the ‘CLOSE’
choke lever to ‘OPEN’ as the engine warms
up.
Fig. 23 – Move the throttle control to the
‘FAST’ position.
Fig. 24 – Select the ‘ON’ position on the
engine switch control
To Next Page
Loading...
Need help?
General
