5) FIG 7
6)
Note: The packaging material is made of recycle materials. Dispose of packaging materials in
accordance with regulations.
Switching on the unit
Do not switch on the unit until it has been completely assembled. Before switching on the unit,
always check the connection cable for signs of damage; only on undamaged connection cable may
be used.
Note: Damaged connection cables are highly dangerous!
POWER CONNECTION
The mains voltage (230V~240V) indicated on the rating plate must correspond with the mains
power supply. Mains connection fuse: min.10A.
1) Insert the mains plug of the unit connection cable into the combined switch/plug. (As fig 5
show)
FIG 5
To Next Page
Loading...
Need help?
General
