OperationOperation
LED Display
All needed information is displayed.
Select Channel
Turn power ON.
LED Display
7
Note
For quick advance,push and hold
arrow key(s).
6
Select Channel
For higher channel,
push UP arrow key.
For lower Channel,
push DOWN
arrow key.
1
2
3
Note
When switching from one chan-
nel to another, squelch will need
to be reset. See Setting Squelch
on page 4.
Note
TX/Batt Indicator
This LED will illuminate red when
batteries are low and need
recharging / replacement or
when the PTT button is pushed
and held (which means your unit
is transmitting).
hh 34 manual layout.4 10/1/98 10:04 AM Page 12
To Next Page
Loading...
